| Contact Us

Jl. Kaji No. 33 H-I, Petojo Utara
Gambir, Jakarta Pusat 10130

Telp : +62 21 631 1661
Email : info@infotel.co.id
Website : www.infotel.co.id

| Switches Series

1. Data Center Switches

BDCOM S5800 Series is a new generation full-10G TOR switches oriented for high-performance computing, data center and high-end campuses. S5800 Series adopts advanced hardware architecture design.

S5800 Series supports up to 1.28Tbps switching capacity, S5800 with 1U height supports 48 10G ports + 4 40G ports or 64 10G ports.

S5800 Series supports BVSS, TRILL, SDN and FCoE/FC. By cooperating with S9500 Series, S5800 Series can access to 15000+ 10G servers.

Developed on the basis of BDROS 6 - a software platform BDCOM with its own independent intellectual property rights, S5800 Series provides high-performance L2/L3/L4 wire speed switching capacity by integrating services such as IPv6, MPLS VPN, network security, flow analysis, virtualization,with high reliable techniques including continuous forwarding, graceful restarting and loop network protection, the work efficiency of S5800 Series and its maximum running time are guaranteed.

S5800 Series supports the “GreenTouch” architecture and “Smart@CHIP”. Its power consumption is lower than 200W

S5800 Series has two models: S5832 and S5864.


2. Campus Network Switches

BDCOM S2200 Series is a new-generation smart access switch designed for carrier's IP MAN and enterprise networks. Based on the new-generation high-performance hardware and BDROS platform, it supports functions such as ACL, QinQ and QoS.

S2200 Seriessupports the telecom-level Ethernet-ring protection protocol with a protection shift time of less than 50ms, STP/RSTP/MSTP, backup of active and standby uplinks, and LACP link aggregation to cater to the requirements of high reliability of carriers;

S2200 Serieshas powerful ACL functions to access and control L2-L7 data based on physical port, VLAN, MAC, IP and protocol port ID, and providing carriers flexible and various policy control methods;

S2200 Seriessupports In-Service Software Upgrade (ISSU) to ensure the unremitting data forwarding during system upgrade;

S2200 Seriessupports various L2 multicast functions such as IGMP-snooping, user fast-leave mechanism and trans-vlan multicast copy to fully meet the operation requirements of carrier’s IPTV;


3. SMB Switches

BDCOM S1200 Series has four models: S1006-4P-60, S1210-8P-150, S1218-16P-330 and S1226-24P-330. It meets the need of networks of different scales.

BDCOM S1200 series can automatically monitor and identify PD (meeting standard of IEEE 802.3 at/af) and power on it. It also provides with 8 10/100M auto-adaptation RJ45 ports. It supports the function of MDI/MDIX auto-overturn and wire-speed forwarding.

Power over Ethernet or PoE describes any of several standardized or ad-hoc systems which pass electrical power along with data on Ethernet cabling. This allows a single cable to provide both data connection and electrical power to devices such as IP phones, wireless access points or IP cameras. It can not only guarantee the well function of the network and avoid the danger of network cabling in the high-voltage condition. Moreover, it greatly reduces the cost.